Skip to content
  • Save $300.00

Wooden Handle Chef Knife Set, 5 Black Hammered Blades

Sale price $300.00 Regular price $600.00
On Sale

Shipping calculated at checkout

Low stock

Description

What Is in the Five Piece Set?

Five full tang knives with black hammered high carbon blades and dark hardwood handles, pinned through the tang and shaped to fill the hand.

What Are the Specifications?

Blade material: High carbon steel 
Blade finish: Hammered, black coated [confirm coating type and whether food-contact certified]
Handle material: Hardwood, dark brown
Construction: Full tang
Edge: Hand sharpened
Set size: 5 pieces

Chef: 13 inches overall, 8 inch blade, 240 to 270 g
Cleaver: 12 inches overall, 7 inch blade, 350 to 420 g
Santoku: 12 inches overall, 7 inch blade, 220 to 250 g
Utility: 10.5 inches overall, [5 or 6] inch blade, 150 to 180 g
Paring: 8.5 inches overall, 3.5 inch blade, 80 to 100 g

What Does Full Tang Mean in a Kitchen Knife?

The steel runs the entire length of the handle as one continuous piece, with the scales pinned to either side of it rather than a short stub glued or pressed into a socket.

Three things follow. The knife cannot separate at the handle, which is the failure mode of partial tang construction and the reason cheap knives come apart in a sink. Balance sits further back, so the knife pivots near the bolster rather than nose-diving. And weight goes up, which most cooks reading this will consider a feature.

The pins visible through the scales are the tell. Full tang construction has to be pinned because there is steel there to pin through.

Why Are the Blades Hammered?

The dimpled texture, called tsuchime in Japanese knifemaking, reduces food sticking.

A wet slice lying flush against a smooth blade creates suction, which is why potato and cucumber ride up with the knife instead of falling away. Hammering breaks the face into peaks and hollows so the slice touches only the high points and air fills the gaps. No suction forms and the food releases.

The same principle drives a granton edge, which solves the problem with scallops instead of dimples.

Why Hardwood Rather Than Composite?

Warmth and weight, against a maintenance cost that is real but small.

Wood sits warmer in the hand than any synthetic, and the grain gives a kitchen set a look that composites cannot. Dark hardwood against black blades keeps the whole set in one register rather than introducing a third colour.

What wood asks for is oiling. A kitchen is the hardest environment there is for timber, so the handles want food grade mineral oil every month or two to stay sealed against the water they meet daily. Our micarta handled set carries the same blades with handles that need nothing, if you would rather not think about it.

Never soak wooden handles and never put them in a dishwasher. Both will crack them.

How Should You Care for Coated High Carbon Steel?

Honestly, because one of the claims in circulation about these knives is wrong.

The edge is not rust resistant. Whatever coating sits on the flat, the cutting bevel is ground after coating and is therefore bare high carbon steel. That is the part that meets wet acidic food. Rinse and dry immediately after every use, not at the end of cooking.

Oil the edge before storing. A thin wipe of food grade mineral oil. Not cooking oils, which oxidise and turn rancid against steel.

Do not scrub the coating. Abrasive pads and scouring powder wear it through. A soft cloth or sponge is enough.

Never a dishwasher. Heat and detergent damage the coating, rust the edge, and crack the handles.

Oil the wood every month or two. Food grade mineral oil or a board conditioner, wiped on and wiped off.

Cut on wood or composite boards. Glass, stone, and ceramic ruin edges in one stroke. Sharpening follows our knife sharpening guide.

Who Is the Set For?

Cooks who want weight and warmth in the hand and will do the small amount of upkeep that carbon steel and wood both ask for.

Not the right set for a kitchen where knives end up in the sink overnight. Buyers wanting lower maintenance should take the micarta version. Buyers wanting forged pattern welded steel should see our hand forged kitchen knives, and the full range is in the kitchen knife sets collection.

Why Choose the Wooden Handle Chef Knife Set?

Full tang steel running the length of every handle, hammered faces that release food instead of holding it, hardwood scales pinned through, and a hand sharpened edge on all five.

Every knife is finished by hand, and we have been making knives since 2001.

Highlights

  • American Express
  • Apple Pay
  • Bancontact
  • BLIK
  • Diners Club
  • Discover
  • EPS
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • Multibanco
  • MB WAY
  • MobilePay
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Shop with confidence

  • Easy exchanges
  • Trusted reviews
  • Eco materials
Back to top