Handmade D2 Drop Point Hunting Knife with Sheath, Sharpener and Gift Box
Shipping calculated at checkout
Low stock
Description
What Is Our D2 Drop Point Hunting Knife?
Our D2 Drop Point Hunting Knife pairs an 8 inch polished blade in D2 tool steel with a dark hardwood handle, a cast bolster with an integrated finger stop, a white spacer, and a polished pommel with a lanyard hole. A fuller runs along the upper blade.
The knife ships as a complete set: a handmade cowhide leather sheath, a sharpener, and a wooden presentation box. It measures 13 inches overall with a 5 inch handle.
What Are the Specifications?
| Specification | Product Detail |
|---|---|
| Blade Material | D2 high-carbon high-chromium tool steel |
| Blade Hardness | 58 to 60 HRC |
| Blade Profile | Drop point with fuller |
| Blade Length | 8 inches |
| Handle Length | 5 inches |
| Overall Length | 13 inches |
| Blade Finish | Polished |
| Bolster | Cast metal with finger stop |
| Handle Material | Dark hardwood [confirm species] with white spacer |
| Pommel | Polished metal with lanyard hole |
| Corrosion Resistance | Semi-stainless, dry after use |
| Includes | Cowhide leather sheath, sharpener [confirm type], wooden gift box |
| Personalization | Engraving available at checkout |
Why a Drop Point for Hunting?
A drop point is the most widely used hunting profile for a reason. The spine runs straight from the handle and then curves gently down to meet the tip, which brings the point below the line of the spine.
A lowered point is strong, since there is plenty of steel behind it, and controllable, since it sits close to the center line of the blade. It is also less likely to puncture something you want intact when you are field dressing, which is the main reason hunters favour it over a clip point.
The profile on this knife follows the finka-style hunting knife, a Russian development of the Finnish puukko with a small guard, a fuller, and a capped pommel. Compare other hunting profiles in our stag handle skinner, which carries a deeper belly for dedicated skinning work.
What Does the Fuller Do?
The groove running along the upper blade is a fuller. Removing steel from the flat, where it contributes least to stiffness, reduces the blade's weight while leaving the spine and edge at full strength. The effect is the same principle as an I-beam.
On an 8 inch blade the saving is noticeable in the hand. It pulls the balance point back toward the bolster, so the knife feels quicker and less nose-heavy than an unfullered blade of the same length.
What Is D2 Tool Steel?
D2 is a high-carbon high-chromium tool steel carrying roughly 11 to 13 percent chromium alongside molybdenum and vanadium. It was developed for industrial cutting dies and holds an edge exceptionally well, which matters on a hunting knife expected to finish a job without resharpening.
D2 is semi-stainless rather than stainless. Much of its chromium locks into carbides, so it resists rust far better than a plain carbon steel but will pit if left wet, bloody, or exposed to salt. Clean it after use. Our knife steel guide compares D2 with carbon, stainless, and Damascus.
What Do the Bolster and Pommel Add?
The cast bolster at the front of the handle extends into a small finger stop below the grip. On a hunting knife that stop matters, since hands get wet and slippery during field work and the stop keeps the index finger from sliding forward onto the edge.
A white spacer separates the bolster from the dark wood. At the butt, a polished pommel caps the handle and adds mass behind the hand, and the lanyard hole through it lets you secure the knife to your wrist or hang it.
What Comes in the Box?
The knife ships in a wooden presentation box with a handmade cowhide leather sheath and a sharpener. The box makes the set a complete gift without further packaging, and it doubles as dry storage between hunting seasons, which is better for the blade than leaving it in the sheath.
[State the sharpener type here. If it is a diamond rod, say so and note it suits D2. If it is a pull-through, describe it as suitable for light touch-ups only.]
How Should You Care for It?
The blade
Wipe the blade after use, especially after field dressing, and wash with mild soap and warm water. Dry it fully and apply a thin coat of mineral oil before storage. D2 tolerates much more than a carbon steel, but blood and moisture left on it will still cause pitting.
The handle
Keep the wood dry and avoid soaking. Treat it occasionally with a food-safe oil so the grain does not dry out around the bolster and pommel.
Storage
Store the knife in its box rather than its sheath. Leather holds humidity against steel, while the box keeps the blade dry and protected.
Sharpening
D2 resists reshaping, so diamond abrasives work far better than ordinary stones. Our knife sharpening guide covers technique. Hold a consistent angle through the curve toward the tip, lifting the handle slightly as you go.
The blade arrives sharp. Open the package carefully and keep the knife out of reach of children.
Why Choose Our D2 Hunting Knife?
Choose our hunting knife for its 8 inch D2 drop point with a weight-saving fuller, cast bolster with a finger stop, dark hardwood handle, polished pommel with a lanyard hole, and a complete gift set with leather sheath, sharpener, and wooden box. Engraving is available at checkout.
Every knife is finished by hand, and we have been making knives since 2001. Buyers after a larger chopping knife should see our Damascus Bowie knives collection.
