Onyx 8 Piece Chef Knife Set, Black Resin Handles
Shipping calculated at checkout
Low stock
Description
What Is the Onyx Chef Knife Set?
The Onyx is an eight piece kitchen set named for its handles. Black resin shot through with white, cast and cured so the swirl runs through the material rather than sitting on its surface, with a raised finger guard at every bolster.
Eight knives covering every cutting job a kitchen produces, from a 3.5 inch paring blade to an 8 inch chef.
8 inch chef knife
8 inch carving knife
8 inch bread knife
7 inch cleaver
7 inch santoku
6 inch fillet knife
5 inch utility knife
3.5 inch paring knife
What Are the Specifications?
Blade material: High carbon steel [confirm grade]
Blade finish: Etched pattern
Edge angle: 15 degrees per side
Handle material: Cast black resin with white
Bolster: Raised finger guard
Set size: 8 knives
What Is a Resin Handle?
Pigmented resin cast and cured into a solid block, then cut and shaped to the tang.
The property that matters in a kitchen is that resin is completely non-porous. Wood holds microscopic channels that take up water over years, which is why even stabilised wood handles eventually move, and why natural wood handles crack. Resin holds none. It cannot swell, shrink, split, or harbour anything, and it never needs oiling.
The swirl comes from pigment moved through the resin before it sets, so the pattern exists in three dimensions and differs wherever the block was cut. No two handles across the eight are the same.
Two honest limitations. Resin is harder than wood but more brittle, so a knife dropped handle-first onto tile can chip where wood would dent. And resin is not heat-proof. Keep the handles off hot pans and away from stovetop edges, where prolonged heat can soften or discolour them.
Our pakkawood handled sets use resin-impregnated wood instead, which splits the difference between the two materials.
Is the Blade Pattern Forged or Etched?
Etched, and worth being direct about.
Forged Damascus is two steels welded together and folded, so the pattern runs through the blade and survives decades of sharpening. The pattern on these blades is applied to the surface of a single uniform steel.
Neither makes a better edge. Cutting performance comes from the steel and the heat treatment, and pattern has no bearing on it at all. What forging buys is the work, which is why it costs several times as much.
Our forged Damascus kitchen knives are the real thing, made individually. The Onyx is the production alternative and priced as one.
Why a Finger Guard?
The raised step between the handle and the blade, and it does two jobs most buyers never think about until they have used a knife without one.
The first is keeping the hand back. Push hard into a cut, especially on something that resists, and a hand on a smooth handle can slide forward onto the edge. A raised bolster stops it. Anyone who has cut themselves on their own kitchen knife has usually done it exactly that way.
The second is clearance. A guard lifts the knuckles slightly off the board, so a chef knife can be driven through to the board without the hand hitting it. Over a long prep session that difference shows up in the wrists.
Finger guards are standard on Western knives and uncommon on Japanese ones, where the grip and cutting style assume a pinch hold further forward. A set with guards is the more forgiving choice for anyone who has not been formally taught knife grip.
What Does a 15 Degree Edge Change?
Sharper cuts, and a different sharpening routine.
Western kitchen knives are traditionally ground at 20 to 25 degrees per side, Japanese ones at 15 or less. Less steel behind the edge means less force to part material, which is what you feel on the first cut.
The practical consequences are in maintenance. A 15 degree bevel is more fragile, so it chips where a wider angle would survive: bone, frozen food, and hard squash are all off limits. Cut on wood or composite only, never glass, stone, or ceramic.
Most importantly, sharpen at 15 degrees. Pull-through sharpeners are usually fixed at Western angles and will grind a 15 degree edge into a 20 degree one over a few passes, quietly undoing the thing you bought the set for. A whetstone or a guided system set to the right angle keeps it. Our sharpening guide covers the method.
Between sharpenings, a honing rod realigns an edge that has rolled and takes seconds.
How Should You Care for Resin and High Carbon Steel?
Two materials, and between them one short routine.
Hand wash only, and dry immediately. Never a dishwasher. Detergent is abrasive, the heat cycle is hard on resin, and blades knocking against racks chip a 15 degree edge.
Keep the handles away from heat. Resin softens and discolours with prolonged heat exposure, so no resting knives across a hot pan and no storing them next to the stovetop.
The handles need nothing else. No oiling, no conditioning, no sealing. Resin’s main advantage over every wood handle made.
Confirm the steel before setting a blade routine. If the blades are high carbon stainless, drying after washing is enough. If they are genuinely non-stainless carbon steel, add a thin coat of food grade mineral oil before storage and expect a reaction to acidic food. Not cooking oils such as olive or vegetable, which oxidise and turn rancid against steel.
Store them properly. A block, a magnetic strip, or in-drawer guards. Loose in a drawer, blades hit each other and chip.
Who Is the Set For?
Anyone outfitting a kitchen from nothing, where eight knives covers the whole problem at once.
Cooks who want handles that need no thought. Resin ignores water entirely, which matters in a household where knives do not always get dried the moment they are washed.
Buyers who want black in a kitchen drawer rather than wood or steel, and who like that no two handles in the set match.
Gift buyers for weddings, housewarmings, and first apartments, where a complete set lands better than a single good knife.
Not the right set for anyone who wants forged steel, individually made, with a pattern that runs through the blade. Those sit in our hand forged kitchen knives, and the difference is worth the money if that is what you are after. The full range is in the kitchen knife sets collection.
Why Choose the Onyx Chef Knife Set?
Eight knives rather than three, a 15 degree edge that cuts keener than a standard Western grind, finger guards at every bolster, and resin handles that will never swell, crack, or need oiling.
Honest about what it is: a production set with an etched finish, not forged Damascus.
