Skip to content
  • Save $70.00

Horn Handle Tanto Folding Knife, Engraved Copper Bolsters

Sale price $250.00 Regular price $320.00
On Sale

Shipping calculated at checkout

Low stock

Description

What Is the Horn Handle Tanto Folding Knife?

A liner lock folder with a pale horn handle running cream through grey green, marked with a dark figured streak toward the centre, and framed by engraved copper bolsters at both ends.

The blade is forged Damascus in 260 layers with a tanto point and a flowing fire pattern.

Measurements run 8 inches open and 4.5 inches folded.

What Are the Specifications?

Blade material: Damascus steel, 1095 and 15N20
Damascus layers: 260 plus
Pattern: Fire
Blade shape: Tanto
Blade length: 3 inches
Blade thickness: 3 to 4 mm
Blade hardness: 58 to 60 HRC
Handle material:  horn with engraved copper bolsters
Lock: Liner lock
Overall length: 8 inches open
Folded length: 4.5 inches
Weight: [confirm, knife only rather than shipped weight]

Blade geometry, the 1095 and 15N20 pairing, and how a liner lock works are covered in full on our Damascus tanto folder, which shares the same construction.

What Makes Horn Different From Bone?

Two materials that look similar in a photograph and behave nothing alike.

Bone is mineral, mostly calcium phosphate, and behaves like a dense ceramic. Hard, takes a high polish, and chips under sharp impact.

Horn is keratin, the same protein as hair, hoof, and fingernail, grown as a sheath over a bone core. Being protein rather than mineral, horn flexes slightly under load instead of chipping, and it is thermoplastic, meaning heat and pressure will flatten a curved horn into workable flat stock without cutting away the structure that gives it strength.

Translucency is the visible tell. Hold a thin horn scale to the light and the pale bands glow through while the dark figure stays opaque. Bone stays solid throughout.

The colour here comes from pigment laid down as the horn grew, so the streaking follows the animal’s life rather than any treatment. No two scales match and the two sides of one knife rarely do either.

Our buffalo horn folder carries the darker end of the same material.

Why Copper Bolsters?

Copper is unusual on a knife and chosen here for contrast rather than convention.

Against pale horn, copper reads warm where steel or nickel silver would read cold, and the colour difference between the two materials stays obvious rather than blending. Engraving the bolsters pushes that further, since cut lines in copper darken as the metal patinates while the raised surfaces stay bright.

Copper is also soft enough to engrave cleanly, which is why it joined brass as a traditional engraving metal centuries ago. A graver cuts a deep clean line in copper in one pass, where hardened steel takes several and resists all the way.

What copper gives up is hardness. Copper bolsters dent where steel would shrug, so the knife belongs in a sheath or a pocket of its own rather than loose with keys.

Double bolsters, one at each end of the handle, is the traditional arrangement. Our Copper Rose folder carries copper across a full handle.

How Should You Care for Horn and Copper?

Three materials, and the horn sets the routine.

Horn is keratin and responds to humidity the way hair does. Very dry air draws moisture out and can open hairline cracks over years, particularly through a winter of indoor heating. An occasional wipe of mineral oil or a light wax slows that considerably.

Avoid three things outright: prolonged soaking, which softens keratin; direct heat, including a car dashboard, since horn is thermoplastic and will warp given enough of it; and long term storage sealed in an airtight container, where untreated horn can attract keratin-feeding insects. Open storage or a case that breathes is better.

Copper darkens through bronze into deep brown with handling, which is patina and should be left alone. Left wet it can eventually go further and produce green verdigris, which is neglect rather than age and wipes off with oil if caught early. Avoid polish entirely, since it strips the patina and drives residue into the engraved lines.

The blade is carbon Damascus with no meaningful corrosion resistance. Wipe dry after use, keep a thin coat of mineral oil or dedicated blade oil on it, and avoid cooking oils, which oxidise and turn rancid against steel. Grey patina on the blade is normal and protective. Orange rust is not.

One drop of light oil at the pivot and lock leaf. Sharpening follows the knife sharpening guide.

Who Is the Knife For?

Collectors of natural handle materials who already own wood and bone and want horn, which looks different in every light. Buyers who want a tanto point and a one handed lock in a knife that is not built as a tactical folder. Anyone drawn to copper, which almost no production knife uses.

Less suited to hard carry, since copper dents and horn dislikes extremes. Working folders sit in the EDC pocket knives collection, and the forged range in the Damascus folding knives collection.

Why Choose the Horn Handle Tanto Folder?

Horn chosen for figure rather than cut from uniform stock, engraved copper at both ends, a 260 layer forged blade at 58 to 60 HRC, a reinforced tanto point, and a liner lock that works one handed.

Every knife is forged and finished by hand, and we have been making knives since 2001.

Highlights

  • American Express
  • Apple Pay
  • Bancontact
  • BLIK
  • Diners Club
  • Discover
  • EPS
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • Multibanco
  • MB WAY
  • MobilePay
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Shop with confidence

  • Easy exchanges
  • Trusted reviews
  • Eco materials
Back to top