Skip to content
  • Save $30.00

Flame Coloured Bolster Knife, Engraved Bone Handle Folder

Sale price $290.00 Regular price $320.00
On Sale

Shipping calculated at checkout

Low stock

Description

What Is the Flame Coloured Bolster Folding Knife?

A folding knife with a bolster carried through purple, violet, and teal, engraved with flowers cut over the colour so the petals sit raised and bright against a darker stippled ground.

Natural bone scales run pale cream alongside it, with a red mosaic pin set at the centre. The contrast is deliberate: one half of the handle does all the work, the other half stays quiet.

The blade is forged Damascus in 156 layers with a drop point and a sabre grind. Overall length runs 7.5 inches open.

What Are the Specifications?

Blade material: Hand forged Damascus steel, 1095 and 15N20
Damascus layers: 156
Blade shape: Drop point
Grind: Sabre
Blade thickness: 2 to 3 mm
Blade hardness: 58 to 60 HRC
Blade length: [confirm]
Handle material: Natural camel bone with mosaic pin
Bolster: Flame coloured and hand engraved [confirm process and metal]
Overall length: 7.5 inches open
Includes: Top grain cowhide leather sheath

Grind, layer count, and steel pairing are covered in full on our wenge folder, which shares the same construction.

How Is the Bolster Coloured?

No paint, no dye, and no coating. The colour is an oxide film grown on the metal itself, and it is the same effect that puts rainbows on a puddle with oil floating on it.

A transparent layer forms on the surface, thin enough that light reflecting off its top and light reflecting off the metal underneath travel slightly different distances and interfere with each other. Certain wavelengths cancel, the rest reach the eye, and the result is a colour determined entirely by how thick that film is. Thinner gives straw and bronze. Thicker gives purple, then blue, then teal.

Because the colour comes from thickness rather than pigment, it cannot fade in sunlight and cannot wash off. What it can do is come off with the layer that carries it, which is the single thing to know about owning one. Covered in care below.

Gunsmiths have used the effect on small steel parts for centuries, where fire blued screws and pins were a mark of finish quality. It appears rarely on knives, and almost never under engraving.

What Is the Engraving?

Flowers cut through the coloured surface, with petals and leaves polished so they catch light while the ground behind them stays dark and textured.

Cutting through a coloured oxide is different from cutting plain metal, because the colour exists only on the surface. Every line the graver takes removes it, exposing bright metal underneath. The engraver is therefore working in two tones at once, using the colour as a background and the cut as the drawing, with no way to recolour a line that goes wrong.

That is why the pattern sits open rather than dense. Tight scroll across this bolster would strip most of the colour away and the whole point of the piece with it.

Our floral full steel folder and brass folder carry engraving on uncoloured metal if you want the conventional version.

How Should You Care for a Coloured Bolster?

One rule, and it is absolute: never polish the bolster.

The colour is a film measured in fractions of a micron. Metal polish is abrasive and will remove it in seconds, and once gone it does not come back with cleaning. What you are left with is a plain grey bolster with engraving on it. The damage is immediate, permanent, and entirely avoidable.

A soft dry cloth is the whole routine. Nothing else touches it. No polish, no abrasive pad, no cleaner, no exception, including when it looks dull from fingerprints. Fingerprints wipe off. Colour does not come back.

Keep the bolster away from keys and pocket grit for the same reason, which is what the sheath is for.

Bone wants the ordinary treatment: out of dishwashers, off radiators, no prolonged soaking, and an occasional wipe of mineral oil to keep the surface fed.

The blade is forged carbon Damascus with little corrosion resistance. Wipe dry after use, keep a thin coat of mineral oil or dedicated blade oil on it, and avoid cooking oils such as olive or vegetable, which oxidise and turn rancid against steel. Grey patina on the blade is normal and protective. Orange rust is not.

One drop of light oil at the pivot. Sharpening follows the knife sharpening guide.

Who Is the Knife For?

Collectors who already own engraved folders in brass, steel, and copper and want one that is none of those colours. Buyers drawn to the knife visually first, which is a legitimate reason and the main one this piece exists.

Gift buyers looking for something that does not look like every other knife, where the colour does the work without any explanation needed.

Less suited to hard carry or to anyone who cleans their knives with polish. The colour is the fragile part and it should be treated as the finish on a watch rather than the finish on a tool. Working folders sit in the EDC pocket knives collection, and the rest of the engraved range in the pocket knives collection.

Why Choose the Flame Coloured Bolster Folding Knife?

Colour grown on metal rather than applied to it, engraving cut through that colour so the pattern reads in two tones, pale bone set against it for contrast, a 156 layer forged Damascus blade at 58 to 60 HRC, and a drop point with a sabre grind.

Every knife is forged and finished by hand, and we have been making knives since 2001.

Highlights

  • American Express
  • Apple Pay
  • Bancontact
  • BLIK
  • Diners Club
  • Discover
  • EPS
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • Multibanco
  • MB WAY
  • MobilePay
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Shop with confidence

  • Easy exchanges
  • Trusted reviews
  • Eco materials
Back to top