5-Piece Etched BBQ and Chef Knife Set with Pine Cone Resin Handles

What Is Our 5-Piece Etched BBQ and Chef Knife Set?

Our 5-Piece Etched BBQ and Chef Knife Set with Pine Cone Resin Handles brings together a chef knife, a meat cleaver, a utility chef knife, a carving fork, and a boning knife. Every blade is cut from 12C27 Swedish stainless steel and carries etched wildlife artwork across the face, with a forged texture along the spine.

The handles are cast pine cone resin in deep purple, paired with a contrasting light section, coloured laminate spacers, brass pins, and a lanyard tube. Browse the wider range in our kitchen knife sets collection.

What Is Included in Our BBQ Knife Set?

• 1 chef knife
• 1 meat cleaver
• 1 utility chef knife
• 1 carving fork
• 1 boning and skinning knife

The combination covers breaking down larger cuts, chopping, portioning, carving at the table, and close trim work, which makes the set as useful at a smoker or grill as it is on a kitchen board.

What Are the Estimated Knife Measurements?

What Are the Chef Knife Measurements?

The longest blade in the set handles chopping, slicing, dicing, and general preparation. Compare single blades in our handmade chef knives collection.

• Blade length: approximately 8.5 inches
• Handle length: approximately 5 inches
• Overall length: approximately 13.5 inches

What Are the Meat Cleaver Measurements?

Our cleaver carries the heaviest blade in the set, with a broad face for scooping prepared ingredients from the board and a finger hole through the rear for hanging storage.

• Blade length: approximately 7 inches
• Handle length: approximately 5 inches
• Overall length: approximately 12 inches

Use the cleaver for vegetables, herbs, and boneless cuts. Avoid bone, frozen food, and other hard materials, since a stainless kitchen cleaver is not a bone splitter.

What Are the Utility Chef Knife Measurements?

The mid-length blade suits slicing cooked meat, portioning, sandwiches, fruit, and everyday preparation without the reach of the full chef knife.

• Blade length: approximately 7 inches
• Handle length: approximately 5 inches
• Overall length: approximately 12 inches

What Are the Carving Fork Measurements?

Two long tines hold a roast, brisket, or bird steady while you carve, and keep your guiding hand clear of the blade.

• Tine length: approximately 7 inches
• Handle length: approximately 5 inches
• Overall length: approximately 12 inches

What Are the Boning Knife Measurements?

The shortest blade gives the most control for boning, trimming silverskin, close detail work, and light skinning tasks.

• Blade length: approximately 4 inches
• Handle length: approximately 5 inches
• Overall length: approximately 9 inches

What Are the Blade Specifications?

12C27 is a Sandvik stainless developed around a fine, even carbide structure. The 13.5% chromium content gives it real corrosion resistance for wet kitchen work, and the moderate carbon keeps it easy to bring back to a keen edge on a stone. Compare it against carbon, Damascus, and tool steels in our knife steel guide.

Cooks who want a layered forged pattern instead of a stainless blade should look at our 5-Piece Raindrop Damascus Chef Knife Set.

What Makes the Pine Cone Resin Handles Distinctive?

Pine cone resin handles are made by casting whole pine cones in dyed resin, then cutting the cured block into scales. The scales in this set are dyed deep purple, so the cone scales read as gold and cream fans against the darker background.

Because every cone grows differently, the fan pattern lands in a different place on every handle. No two sets in a run are identical, and the handles within a single set will not match each other exactly either.

Each handle is finished with a contrasting light front section, thin coloured laminate spacers, brass pins, and a lanyard tube through the butt. The resin is non-porous, so the grip stays stable in a wet kitchen and wipes clean without absorbing oils or odours.

Who Is Our Etched Knife Set For?

The mix of blades suits home cooks who grill and smoke, caterers carving on the pass, and anyone who breaks down larger cuts at home. Collectors buy it for the etched artwork and the cast resin handles.

Engraving is available at checkout, which makes the set a practical option for a wedding, housewarming, or milestone gift. Our best chef knives collection lists other pieces worth pairing with it.

How Should You Care for 12C27 Kitchen Knives?

Hand wash each piece with mild soap and warm water, then dry the blade, spacers, and handle immediately. Stainless resists rust rather than being immune to it, so standing water and long soaking still cause spotting around the pins and bolster line.

Keep the set out of the dishwasher. Detergent and heat dull the etched contrast and stress the resin around the pins. Apply a light coat of food-safe mineral oil before long storage.

Cut on wood or a knife-friendly synthetic board rather than glass, stone, or steel, since our cutting board guide explains how much edge damage a hard surface causes. Sharpen when performance drops, following our knife sharpening guide. 12C27 responds well to a standard stone and does not need diamond abrasives.

Why Choose Our 5-Piece Etched Knife Set?

Choose our set for its five task-specific pieces, 12C27 Swedish stainless blades, etched wildlife artwork, cast pine cone resin handles, and available engraving. The stainless build makes it the lower-maintenance choice next to a carbon blade.

Buyers weighing a stainless set with a fully decorative blade finish can also compare our 5-Piece J2 Stainless Steel Kitchen Knife Set.