5-Piece Damascus Chef Knife Set with Ocean Resin Handles

What Is Our 5-Piece Damascus Chef Knife Set?

Our 5-Piece Damascus Chef Knife Set with Ocean Resin Handles brings together five working blade profiles in hand-forged Damascus steel. Every blade carries a flowing layered pattern with a scaled hammer texture worked across the mid-section, and every handle pairs poured resin in teal, cream, and soft coral with a black bolster and brass pins.

The set covers chopping, slicing, portioning, and everyday preparation without duplicated blades. Browse the wider range in our kitchen knife sets collection.

What Is Included in Our Damascus Kitchen Knife Set?

• 1 chef knife
• 1 slicing knife
• 1 chef cleaver
• 1 santoku knife
• 1 utility knife

Each piece shares the same handle build and blade finish, so the set reads as one coordinated kit on a board or a magnetic rail.

What Are the Estimated Knife Measurements?

What Are the Chef Knife Measurements?

The longest blade in the set handles chopping, slicing, dicing, and general preparation. Compare individual pieces in our handmade chef knives collection.

• Blade length: approximately 8.5 inches
• Handle length: approximately 5 inches
• Overall length: approximately 13.5 inches
• Spine thickness: approximately 2.5 to 3 mm

What Are the Slicing Knife Measurements?

The narrower blade and long straight edge suit brisket, roast, poultry, and fish, where a single clean draw matters more than a rocking motion.

• Blade length: approximately 8 inches
• Handle length: approximately 5 inches
• Overall length: approximately 13 inches
• Spine thickness: approximately 2.2 to 2.8 mm

What Are the Chef Cleaver Measurements?

The broad curved blade gives knuckle clearance above the board and a wide face for moving prepared ingredients across to the pan. The heavier spine lets it drop through dense vegetables without forcing.

• Blade length: approximately 7.5 inches
• Handle length: approximately 5 inches
• Overall length: approximately 12.5 inches
• Blade width: approximately 2.75 inches
• Spine thickness: approximately 2.8 to 3.2 mm

Use the cleaver for vegetables, herbs, fruit, and boneless cuts. Avoid bone, frozen food, and other hard materials.

What Are the Santoku Knife Measurements?

The shorter, flatter profile suits push cutting rather than rocking, which works well for vegetables, herbs, and boneless meat on a smaller board.

• Blade length: approximately 7 inches
• Handle length: approximately 5 inches
• Overall length: approximately 12 inches
• Spine thickness: approximately 2.3 to 2.8 mm

What Are the Utility Knife Measurements?

Our utility knife covers fruit, sandwiches, smaller vegetables, and meat trimming without the reach of a full chef knife.

• Blade length: approximately 6 inches
• Handle length: approximately 4.75 inches
• Overall length: approximately 10.75 inches
• Spine thickness: approximately 2.2 to 2.6 mm

Measurements are approximate because every blade is forged and ground by hand, so small variations between individual sets are normal.

What Are the Blade Specifications?

Forge-welding two steels and folding the billet produces the layered pattern, which is structural rather than applied to the surface. The pattern stays visible as the blades are sharpened over the years. Compare Damascus against stainless, carbon, and tool steels in our knife steel guide.

What Does the Hammered Blade Texture Do?

The scaled hammer marks running across the mid-blade reduce the contact area between steel and food. Air breaks the suction that makes potato, cucumber, and apple slices cling to a flat blade, so cut pieces drop away instead of stacking up on the side.

Grind geometry behind the edge affects food release more than surface texture does, so treat the hammered face as a useful addition rather than a complete fix for sticking. Every strike lands slightly differently, which is why no two blades in the set carry an identical texture.

What Makes the Ocean Resin Handles Distinctive?

Each handle is poured resin swirled in teal, cream, and soft coral, then cut, shaped, and polished. Colour placement is decided by how the pigments move in the pour rather than by a repeatable pattern, so no two handles match, including within a single set.

A black bolster sits between the resin and the blade, secured with brass pins that carry through to the resin section. The sculpted profile flares at the butt, which gives the hand something to pull against during longer prep sessions.

Cured resin is non-porous, so the grip stays dimensionally stable in a wet kitchen and wipes clean without absorbing oils or odours. Unlike wood, it does not need oiling or seasonal conditioning.

Who Is Our Damascus Knife Set For?

The blade mix suits home cooks who want one coordinated kit instead of mismatched knives, cooks who prefer a forged blade to a stamped one, and collectors who buy for the pattern and handle work. Engraving is available at checkout, which makes the set a practical wedding, anniversary, or housewarming gift.

Our best chef knives collection lists individual pieces worth pairing with it.

How Should You Care for Damascus Kitchen Knives?

Hand wash each knife with mild soap and warm water, then dry the blade, bolster, and handle immediately with a soft cloth. Damascus built on carbon steels spots if left wet, and standing water works its way into the joint between resin and bolster.

Keep the set out of the dishwasher. Heat and detergent dull the pattern contrast and stress the resin around the pins. Apply a thin coat of food-safe mineral oil to the blades before long storage.

Cut on wood or a knife-friendly synthetic board rather than glass, stone, or steel, since our cutting board guide covers how much edge damage a hard surface causes. Sharpen when performance drops using our knife sharpening guide, taking care to preserve the hammered texture above the bevel.

Why Choose Our 5-Piece Damascus Chef Knife Set?

Choose our set for its five complementary blade profiles, hand-forged Damascus with a scaled hammer texture, poured resin handles that no two sets share, black bolsters with brass pins, and available engraving. The resin handles are the lower-maintenance option next to wood.

Cooks who prefer a natural handle material can compare our 5-Piece Raindrop Damascus Chef Knife Set with wenge wood. Buyers who want an easier-maintenance stainless blade should look at our 5-Piece J2 Stainless Steel Kitchen Knife Set.