Blue Bone Tanto Pocket Knife, Carved Floral Handle
Shipping calculated at checkout
Low stock
Description
What Is the Blue Bone Tanto Folding Knife?
A liner lock folder with a camel bone handle dyed deep blue and carved with a repeating fan pattern, each fan radiating from a dark centre and overlapping the one beside it.
Dye sits deeper in the cut recesses than on the raised surface, so the pattern reads as light blue ribs against darker shadow rather than as a flat coloured panel.
The blade is forged Damascus in 260 layers with a tanto point and a fire pattern. Measurements run 8.5 inches open and 4.5 inches folded. A tooled leather sheath is included.
What Are the Specifications?
Blade material: Damascus steel, 1095 and 15N20
Damascus layers: 260 plus
Pattern: Fire
Blade shape: Tanto
Blade length: 3.25 inches
Blade thickness: 3 to 4 mm
Blade hardness: 58 to 60 HRC
Handle material: Blue dyed camel bone, carved
Carving method: [confirm, laser or hand cut]
Bolster: Damascus with brass
Lock: Liner lock
Overall length: 8.5 inches open
Folded length: 4.5 inches
Weight: [confirm, knife only rather than shipped weight]
Includes: Tooled leather sheath
Tanto geometry, the 1095 and 15N20 pairing, and liner lock operation are covered in full on our Damascus tanto folder.
What Is the Handle Pattern?
Overlapping fans, each one radiating from a small dark centre, repeated in rows across the full scale.
The motif has a long history in East Asian decorative work, where the chrysanthemum and the folding fan both appear as repeating ground patterns on lacquer, textile, and metalwork. Both read the same way: a unit simple enough to repeat, complex enough that the eye keeps finding detail in it.
What makes it work on bone specifically is the depth. Carved into a dyed surface, each rib catches light on its raised edge and holds shadow in its groove, so the handle shifts as it turns in the hand rather than presenting one flat face.
Our owl folder carries geometric carving on bone and the fish knife carries hand scrimshaw, if you want to compare how differently the same material takes decoration.
Why Blue Bone?
Bone takes dye more evenly than almost any natural handle material, which is why it has been coloured for as long as it has been used.
The reason is porosity. Bone holds microscopic channels that draw dye in and hold it, so colour penetrates rather than sitting on the surface. On a carved handle that matters twice over, because the cut recesses expose fresh porous material and take the dye deeper than the sealed outer surface does. What you get is tonal variation that follows the carving, not a uniform coat of paint.
Blue in particular shows the grain. The natural structure of the bone stays visible as faint lighter streaking through the colour, which is the tell that separates dyed bone from moulded resin.
One honest note: dye is pigment, and pigment fades under ultraviolet light. Keep the knife out of windowsills and car dashboards. Our burnt bone folder is coloured by fire rather than dye and does not have that limitation.
How Should You Store a Carbon Steel Knife?
Worth its own section, because most advice circulating on this is wrong and some of it causes the problem it claims to solve.
Do not store a knife in a sealed plastic bag. Trapped air carries humidity, temperature swings condense that humidity onto the coldest surface in the bag, which is the blade, and the water has nowhere to go. Plastic bags rust carbon steel rather than protecting it.
Do not store a knife in its leather sheath long term. Leather holds moisture and the tanning process leaves residues that are mildly acidic. Sheaths are for carrying.
What actually works. Clean the knife, dry it completely, and apply a thin coat of mineral oil or a dedicated blade oil. Store it in open air, in a drawer, or in a breathable cloth sleeve or knife roll. For long storage in a closed case, add a silica gel pack and replace it periodically, or wrap the blade in vapour corrosion inhibitor paper, which is what manufacturers use to ship bare steel.
Check anything stored for months once or twice a year. Forged Damascus has no meaningful corrosion resistance, so a grey patina will develop over time, which is normal and protective. Orange rust is not, and comes off with oil and a non-abrasive cloth before it pits.
For the handle, avoid dishwashers, radiators, and prolonged soaking, and give the bone an occasional wipe of mineral oil. Keep polish away from the carving, since it settles in the cut lines and dulls them.
One drop of light oil at the pivot and lock leaf. Sharpening follows the knife sharpening guide.
Who Is the Knife For?
Buyers who want colour on a knife and are tired of brown, black, and grey. Collectors of decorated bone who already own natural and burnt scales and want dyed. Anyone drawn to repeating pattern work over figural or scroll decoration.
The tanto point suits push cutting, cord, packaging, and anything cut against a flat surface, with a reinforced tip that survives being used as a tool. What it will not do is slice on a curve or skin, since a tanto has almost no belly.
Gift buyers for birthdays, Father’s Day, and collectors generally. Buyers wanting belly and a general purpose profile should see the buffalo horn drop point, and the full range sits in the Damascus folding knives collection.
Why Choose the Blue Bone Tanto Folding Knife?
Bone dyed deep blue and carved so the colour pools in the cuts, a repeating fan pattern that changes as the handle turns, a 260 layer forged blade at 58 to 60 HRC, a reinforced tanto point, and a tooled leather sheath.
Every knife is forged and finished by hand, and we have been making knives since 2001.
