{"product_id":"onyx-black-resin-chef-knife-set-8-piece","title":"Onyx 8 Piece Chef Knife Set, Black Resin Handles","description":"\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWhat Is the Onyx Chef Knife Set?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Onyx is an eight piece kitchen set named for its handles. Black resin shot through with white, cast and cured so the swirl runs through the material rather than sitting on its surface, with a raised finger guard at every bolster.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEight knives covering every cutting job a kitchen produces, from a 3.5 inch paring blade to an 8 inch chef.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e8 inch chef knife\u003cbr\u003e8 inch carving knife\u003cbr\u003e8 inch bread knife\u003cbr\u003e7 inch cleaver\u003cbr\u003e7 inch santoku\u003cbr\u003e6 inch fillet knife\u003cbr\u003e5 inch utility knife\u003cbr\u003e3.5 inch paring knife\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWhat Are the Specifications?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBlade material: High carbon steel [confirm grade]\u003cbr\u003eBlade finish: Etched pattern\u003cbr\u003eEdge angle: 15 degrees per side\u003cbr\u003eHandle material: Cast black resin with white\u003cbr\u003eBolster: Raised finger guard\u003cbr\u003eSet size: 8 knives\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWhat Is a Resin Handle?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePigmented resin cast and cured into a solid block, then cut and shaped to the tang.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe property that matters in a kitchen is that resin is completely non-porous. Wood holds microscopic channels that take up water over years, which is why even stabilised wood handles eventually move, and why natural wood handles crack. Resin holds none. It cannot swell, shrink, split, or harbour anything, and it never needs oiling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe swirl comes from pigment moved through the resin before it sets, so the pattern exists in three dimensions and differs wherever the block was cut. No two handles across the eight are the same.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTwo honest limitations. Resin is harder than wood but more brittle, so a knife dropped handle-first onto tile can chip where wood would dent. And resin is not heat-proof. Keep the handles off hot pans and away from stovetop edges, where prolonged heat can soften or discolour them.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/kitchen-knives-set\"\u003epakkawood handled sets\u003c\/a\u003e use resin-impregnated wood instead, which splits the difference between the two materials.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eIs the Blade Pattern Forged or Etched?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eEtched, and worth being direct about.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eForged Damascus is two steels welded together and folded, so the pattern runs through the blade and survives decades of sharpening. The pattern on these blades is applied to the surface of a single uniform steel.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNeither makes a better edge. Cutting performance comes from the steel and the heat treatment, and pattern has no bearing on it at all. What forging buys is the work, which is why it costs several times as much.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/chef-knives\"\u003eforged Damascus kitchen knives\u003c\/a\u003e are the real thing, made individually. The Onyx is the production alternative and priced as one.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWhy a Finger Guard?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe raised step between the handle and the blade, and it does two jobs most buyers never think about until they have used a knife without one.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe first is keeping the hand back. Push hard into a cut, especially on something that resists, and a hand on a smooth handle can slide forward onto the edge. A raised bolster stops it. Anyone who has cut themselves on their own kitchen knife has usually done it exactly that way.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe second is clearance. A guard lifts the knuckles slightly off the board, so a chef knife can be driven through to the board without the hand hitting it. Over a long prep session that difference shows up in the wrists.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFinger guards are standard on Western knives and uncommon on Japanese ones, where the grip and cutting style assume a pinch hold further forward. A set with guards is the more forgiving choice for anyone who has not been formally taught knife grip.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWhat Does a 15 Degree Edge Change?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eSharper cuts, and a different sharpening routine.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWestern kitchen knives are traditionally ground at 20 to 25 degrees per side, Japanese ones at 15 or less. Less steel behind the edge means less force to part material, which is what you feel on the first cut.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe practical consequences are in maintenance. A 15 degree bevel is more fragile, so it chips where a wider angle would survive: bone, frozen food, and hard squash are all off limits. Cut on wood or composite only, never glass, stone, or ceramic.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMost importantly, sharpen at 15 degrees. Pull-through sharpeners are usually fixed at Western angles and will grind a 15 degree edge into a 20 degree one over a few passes, quietly undoing the thing you bought the set for. A whetstone or a guided system set to the right angle keeps it. Our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003esharpening guide\u003c\/a\u003e covers the method.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBetween sharpenings, a honing rod realigns an edge that has rolled and takes seconds.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eHow Should You Care for Resin and High Carbon Steel?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eTwo materials, and between them one short routine.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHand wash only, and dry immediately.\u003c\/strong\u003e Never a dishwasher. Detergent is abrasive, the heat cycle is hard on resin, and blades knocking against racks chip a 15 degree edge.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKeep the handles away from heat.\u003c\/strong\u003e Resin softens and discolours with prolonged heat exposure, so no resting knives across a hot pan and no storing them next to the stovetop.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe handles need nothing else.\u003c\/strong\u003e No oiling, no conditioning, no sealing. Resin’s main advantage over every wood handle made.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eConfirm the steel before setting a blade routine.\u003c\/strong\u003e If the blades are high carbon stainless, drying after washing is enough. If they are genuinely non-stainless carbon steel, add a thin coat of food grade mineral oil before storage and expect a reaction to acidic food. Not cooking oils such as olive or vegetable, which oxidise and turn rancid against steel.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eStore them properly.\u003c\/strong\u003e A block, a magnetic strip, or in-drawer guards. Loose in a drawer, blades hit each other and chip.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWho Is the Set For?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAnyone outfitting a kitchen from nothing, where eight knives covers the whole problem at once.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCooks who want handles that need no thought. Resin ignores water entirely, which matters in a household where knives do not always get dried the moment they are washed.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuyers who want black in a kitchen drawer rather than wood or steel, and who like that no two handles in the set match.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGift buyers for weddings, housewarmings, and first apartments, where a complete set lands better than a single good knife.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot the right set\u003c\/strong\u003e for anyone who wants forged steel, individually made, with a pattern that runs through the blade. Those sit in our \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/chef-knives\"\u003ehand forged kitchen knives\u003c\/a\u003e, and the difference is worth the money if that is what you are after. The full range is in the \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/kitchen-knives-set\"\u003ekitchen knife sets collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"4\"\u003eWhy Choose the Onyx Chef Knife Set?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eEight knives rather than three, a 15 degree edge that cuts keener than a standard Western grind, finger guards at every bolster, and resin handles that will never swell, crack, or need oiling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHonest about what it is: a production set with an etched finish, not forged Damascus.\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without Engraving","offer_id":68009143238819,"sku":"0542","price":350.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with Engraving","offer_id":68009143271587,"sku":"0542-1","price":400.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/Onyx_8_Piece_Chef_Knife_Set_with_Black_Resin_Handles.webp?v=1795069195","url":"https:\/\/www.stagsteelknives.com\/products\/onyx-black-resin-chef-knife-set-8-piece","provider":"Stag Steel Knives","version":"1.0","type":"link"}