{"product_id":"nordic-hunting-knife-1095-carved-handle-leather-sheath","title":"Handmade Nordic Hunting Knife in 1095 Carbon Steel with Carved Handle","description":"\u003ch2\u003eWhat Is Our Nordic Hunting Knife?\u003c\/h2\u003e\n\u003cp\u003eOur Nordic Hunting Knife pairs a 12 inch single-edged blade in 1095 carbon steel with a hand-carved wood handle, an engraved brass collar at the blade junction, and a hand-stitched leather sheath. The blade runs 4 mm thick at the spine with a symmetrical drop point.\u003c\/p\u003e\n\u003cp\u003eFree engraving is included. Read the care section before buying, since 1095 is a reactive steel with no corrosion resistance at all.\u003c\/p\u003e\n\u003ch2\u003eWhat Are the Specifications?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eProduct Detail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Material\u003c\/td\u003e\n\u003ctd\u003e1095 high carbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eApproximately 0.95 to 1.03% carbon, no chromium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Hardness\u003c\/td\u003e\n\u003ctd\u003e 56 to 62 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Length\u003c\/td\u003e\n\u003ctd\u003e12 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Width\u003c\/td\u003e\n\u003ctd\u003eApproximately 1.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Thickness\u003c\/td\u003e\n\u003ctd\u003e4 mm at the spine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Profile\u003c\/td\u003e\n\u003ctd\u003eSingle edged, straight spine, drop point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle Length\u003c\/td\u003e\n\u003ctd\u003e5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length\u003c\/td\u003e\n\u003ctd\u003e17 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle Material\u003c\/td\u003e\n\u003ctd\u003eHand-carved hardwood \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings\u003c\/td\u003e\n\u003ctd\u003eEngraved brass collar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorrosion Resistance\u003c\/td\u003e\n\u003ctd\u003eNone. Reactive steel, requires drying and oiling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eHand-stitched leather sheath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePersonalization\u003c\/td\u003e\n\u003ctd\u003eFree engraving at checkout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhy Does the Blade Geometry Matter Here?\u003c\/h2\u003e\n\u003cp\u003eWorth explaining, because it is what separates a knife built to work from one built to look at.\u003c\/p\u003e\n\u003cp\u003eThe spine is unsharpened and runs the full length, so you can brace a thumb or forefinger on it for controlled cuts. That single feature is what makes detailed work possible, and it is why a double-edged blade cannot do this job whatever its marketing says.\u003c\/p\u003e\n\u003cp\u003eThe drop point puts the tip in line with the centre of the blade rather than above or below it, which gives you a strong, well-supported point and keeps the tip from catching when you work along a surface. Four millimetres of stock at the spine means it takes lateral load without complaint.\u003c\/p\u003e\n\u003cp\u003eThe result is a blade suited to field dressing, camp work, food preparation, woodwork, and general cutting. Compare it against a single-edged clipped-point profile in our \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/damascus-bowie-knives\"\u003eDamascus Bowie knives collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eIs 1095 a Good Steel for a Working Knife?\u003c\/h2\u003e\n\u003cp\u003e1095 carries around 0.95 to 1.03 percent carbon and no chromium whatsoever. The high carbon supports a fine grain structure that takes an exceptionally keen edge and holds it well, and the absence of alloying elements makes it easy to bring back on an ordinary stone. No diamond abrasives, no technique, no special kit.\u003c\/p\u003e\n\u003cp\u003eThe absence of chromium is the whole catch. Chromium is what makes steel stainless, and without it there is no corrosion resistance at all. A 1095 blade left wet will spot within hours. Handle it after cutting citrus or onion and leave it, and the blade discolours.\u003c\/p\u003e\n\u003cp\u003eFor anyone who already wipes a blade down as they work, 1095 is one of the most rewarding steels available. For anyone whose knives sit in a pack overnight after a wet day, stainless is the better choice. Compare the options in our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/what-is-the-best-steel-for-knives\"\u003eknife steel guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat Is the Difference Between Patina and Rust?\u003c\/h2\u003e\n\u003cp\u003eThe blades will change colour with use, so it helps to know which change is which.\u003c\/p\u003e\n\u003cp\u003ePatina is a stable grey or blue-grey darkening that forms as the steel oxidizes slowly and evenly. It is protective, it slows further corrosion, and it is why old carbon blades look the way they do. Acidic materials speed it up. Patina is not damage.\u003c\/p\u003e\n\u003cp\u003eRust appears as rough reddish-brown spots, feels powdery, and rubs off as powder under a fingernail. Rust pits the steel and spreads if ignored.\u003c\/p\u003e\n\u003cp\u003eThe practical test: if it wipes off powdery, it is rust and needs removing with a mild abrasive. If it is smooth and stays put, it is patina and should be left alone.\u003c\/p\u003e\n\u003ch2\u003eWhat Is the Carving on the Handle?\u003c\/h2\u003e\n\u003cp\u003eThe handle is carved by hand with interlacing knotwork running the length of the grip, cut in relief so the pattern sits proud of the surface rather than being scratched into it. Bands of chevron cuts separate the knotwork panels.\u003c\/p\u003e\n\u003cp\u003eInterlace of this kind runs through Norse and Insular decorative work, where continuous interwoven bands appear on stone, metalwork, and wood. Carving it into a knife handle follows that tradition rather than a modern one.\u003c\/p\u003e\n\u003cp\u003eDepth and pattern flow vary between pieces because every handle is cut by hand. No two are identical, and the variation is visible when two are held together.\u003c\/p\u003e\n\u003ch2\u003eWhat Does the Brass Collar Add?\u003c\/h2\u003e\n\u003cp\u003eA brass collar sits at the blade junction, engraved with a chevron pattern that echoes the bands on the handle. The collar caps the end grain of the wood, which is where a wooden handle takes up moisture fastest, and it adds mass at the front of the grip.\u003c\/p\u003e\n\u003cp\u003eBrass warms in tone and takes a patina as it ages unless polished. Many owners prefer the aged look on a working knife and leave it.\u003c\/p\u003e\n\u003ch2\u003eWhat Does the Leather Sheath Provide?\u003c\/h2\u003e\n\u003cp\u003eThe hand-stitched leather sheath carries a tooled spiral pattern on the face, contrast saddle stitching around the edge, brass rivets at the stress points, and a snap-fastened retaining strap over the handle.\u003c\/p\u003e\n\u003cp\u003eDry the blade completely before it goes back in. Leather holds humidity against steel, which matters a great deal on 1095. Use the sheath for carrying, not for storage.\u003c\/p\u003e\n\u003ch2\u003eHow Should You Care for a 1095 Carbon Steel Knife?\u003c\/h2\u003e\n\u003cp\u003eRead this before buying. Carbon steel is not difficult to look after, but it is unforgiving of neglect, and most complaints about carbon blades come from owners who were never told what to expect.\u003c\/p\u003e\n\u003ch3\u003eDuring use\u003c\/h3\u003e\n\u003cp\u003eWipe the blade with a damp cloth between tasks, particularly after anything acidic. Do not leave a wet blade lying on a surface while you do something else.\u003c\/p\u003e\n\u003ch3\u003eAfter every use\u003c\/h3\u003e\n\u003cp\u003eWash with mild soap and warm water, then dry immediately and completely. Water left on 1095 for an hour is enough to start a spot.\u003c\/p\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eStore the knife dry, with air around it, and out of its sheath. Apply a thin coat of food-safe mineral oil before any period of disuse, and reapply if it sits untouched for more than a few weeks.\u003c\/p\u003e\n\u003ch3\u003eThe handle\u003c\/h3\u003e\n\u003cp\u003eWood is porous. Keep it dry and treat it occasionally with a food-safe oil so the grain does not shrink away from the tang or the brass collar. Avoid soaking the carved sections, where water sits in the cuts.\u003c\/p\u003e\n\u003ch3\u003eBoards and sharpening\u003c\/h3\u003e\n\u003cp\u003eCut on wood or a knife-friendly surface rather than glass, stone, or steel, since our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-cutting-board-for-knives\"\u003ecutting board guide\u003c\/a\u003e covers how much edge damage a hard surface causes. Sharpen when performance drops using our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003eknife sharpening guide\u003c\/a\u003e. 1095 is among the easiest steels to sharpen and takes a very fine edge on ordinary stones.\u003c\/p\u003e\n\u003cp\u003eThe blade arrives sharp. Open the package carefully and keep the knife out of reach of children.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose Our Nordic Hunting Knife?\u003c\/h2\u003e\n\u003cp\u003eChoose our knife for its 12 inch 1095 carbon steel blade at 4 mm stock, single-edged drop point built for real work, hand-carved knotwork handle, engraved brass collar, hand-stitched leather sheath, and free engraving at checkout.\u003c\/p\u003e\n\u003cp\u003eEvery blade is forged and finished by hand in Fredericton, New Brunswick, where we have been making knives since 2001. Collectors after a historical Anglo-Saxon form should see our \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/broken-back-seax-knife-runic-blade-leather-sheath\"\u003ebroken-back seax\u003c\/a\u003e.\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without Engraving","offer_id":47862558458044,"sku":"0262","price":157.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with Engraving","offer_id":47862558490812,"sku":"0262-1","price":177.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/Handmade_Nordic_hunting_knife_with_1095_carbon_steel_blade_carved_handle_and_leather_sheath.webp?v=1789972217","url":"https:\/\/www.stagsteelknives.com\/products\/nordic-hunting-knife-1095-carved-handle-leather-sheath","provider":"Stag Steel Knives","version":"1.0","type":"link"}