{"product_id":"gyuto-knife-200mm-damascus-whetstone-set","title":"Gyuto Knife 200mm, 67 Layer Damascus and Whetstone","description":"\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is in the Gyuto Gift Set?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eA 200 mm gyuto with a 67 layer stainless Damascus blade and a wooden wa handle, together with a 1000 grit whetstone on a non-slip bamboo base.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eKnife and stone, which is the pairing most knife gifts leave incomplete. A good blade without the means to maintain it ends up dull within a year.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Are the Specifications?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eKnife type: Gyuto, Japanese chef knife\u003cbr\u003eBlade length: 200 mm\u003cbr\u003eBlade height: 48 mm\u003cbr\u003eBlade thickness: 2 mm\u003cbr\u003eSteel: 67 layer stainless Damascus\u003cbr\u003eCore steel: 10Cr15CoMoV, VG-10 equivalent\u003cbr\u003eHardness: 60 ±1 HRC\u003cbr\u003eFinish: Tsuchime, hammered\u003cbr\u003eBevel: Double, ambidextrous\u003cbr\u003eHandle length: 125 mm\u003cbr\u003eWeight: 170 g\u003cbr\u003eIncluded: 1000 grit white corundum whetstone with bamboo base\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHandle options\u003c\/strong\u003e\u003cbr\u003eClassic: Walnut with cherry wood bolster\u003cbr\u003eVerdant: Stabilised birch burl with cherry wood bolster\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is a Gyuto?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Japanese chef knife, and the most generally useful blade shape in any kitchen.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe name translates roughly as beef knife, which reflects its origin. Japanese kitchens historically used single purpose knives, and the gyuto was developed as Western cooking arrived and cooks needed one blade that could handle meat alongside everything else. The profile borrows from the French chef knife: a curved belly that rocks through chopping, a pointed tip for detail work, and length enough for slicing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhat makes it Japanese rather than a copy is the construction. A gyuto is thinner, harder, and ground finer than a Western chef knife. At 2 mm thick and 60 HRC this one sits well inside that tradition, where a German chef knife of the same length might run 2.5 mm and 56 HRC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThinner and harder cuts better and demands more care. Covered below.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt 200 mm, this is the standard size and the one most cooks should buy. Shorter is easier to control in a small kitchen, longer suits bulk prep.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/6-piece-kurouchi-knife-set-wa-handle\"\u003esix piece kurouchi set\u003c\/a\u003e carries the santoku, nakiri, and bunka shapes if you want the specialised profiles alongside it.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Does 67 Layer Damascus Actually Mean?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eWorth explaining properly, because the layer count is the most misunderstood number in knife marketing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe blade is built as three parts. A single piece of hard core steel runs through the middle and forms the cutting edge. Either side of it, 33 layers of softer stainless are forge welded as cladding. Core plus cladding gives 67.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe core does all the cutting.\u003c\/strong\u003e The 10Cr15CoMoV core, equivalent to VG-10, is what takes the edge, holds it, and determines how the knife performs. Everything about sharpness and edge retention comes down to that steel and its heat treatment.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe cladding does two other jobs.\u003c\/strong\u003e It protects the brittle hard core, because 60 HRC steel alone would be fragile, and the softer outer layers absorb shock the core cannot. And it produces the pattern, since the layers show where the blade is ground and etched.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSo the 67 is real, but it describes the construction rather than the cutting. A knife with 67 layers of mediocre cladding around an excellent core will outperform one with 200 layers around a poor one. The core steel is the number to look at, and here it is a good one.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/chef-knives\"\u003eforged Damascus kitchen knives\u003c\/a\u003e are built differently again, with pattern welded steel throughout rather than as cladding.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy Stainless Damascus Rather Than Carbon?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBecause most kitchens are not run by people who want to think about their knives.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCarbon steel takes a keener edge and sharpens more easily, which is why traditional Japanese knives use it. The cost is constant attention: dry it immediately every time, oil it before storage, expect it to darken against tomato and lemon, and accept rust if you forget once.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eStainless Damascus with a VG-10 equivalent core gives up a little of that keenness and removes the entire maintenance burden. No oiling, no reaction to acidic food, no rust from a knife left on the board for ten minutes. At 60 HRC the edge retention is better than most carbon steels anyway, because hardness and wear resistance do more for edge life than carbon content alone.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor a gift in particular, stainless is the right choice. Giving someone a carbon steel knife is giving them a maintenance routine they did not ask for.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/kitchen-knives-set\"\u003ecarbon steel sets\u003c\/a\u003e are there for cooks who want the traditional version and know what it involves.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Can You Do With a 1000 Grit Whetstone?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eRestore a dull edge to working sharpness, which is the job most home cooks actually need doing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGrit numbers describe abrasive particle size. Coarse stones, 200 to 400, reshape a damaged or chipped edge and remove a lot of metal. Mid grits, 800 to 1500, set a sharp working edge and handle ordinary resharpening. Fine stones, 3000 and above, polish that edge to a refined finish.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA 1000 grit stone sits in the middle and is the single most useful stone to own. It will take a knife from dull to genuinely sharp in a few minutes and is the only stone many cooks ever need.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat it will not do\u003c\/strong\u003e is finish a 60 HRC VG-10 edge to its full potential. That edge can take a polish well beyond what 1000 grit leaves, and a 3000 or 6000 grit finishing stone afterwards makes a noticeable difference on delicate work. Add one when you are ready. The 1000 is where to start.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSoak the stone before use, keep it wet while working, and hold a consistent angle of around 15 degrees per side. Our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003eknife sharpening guide\u003c\/a\u003e covers the technique.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe bamboo base keeps the stone from sliding, which matters more than it sounds when both hands are on the knife.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhich Handle Should You Choose?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBoth are octagonal wa handles with a cherry wood bolster, and both weigh the same. The difference is the wood and what it says.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eClassic, walnut.\u003c\/strong\u003e Mid brown with straight visible grain, warm and understated. A handle that looks like a tool rather than an object, and ages gradually darker with handling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVerdant, stabilised birch burl.\u003c\/strong\u003e Burl is wood grown around a growth disturbance, so the grain swirls rather than running straight, and no two pieces are alike. Stabilisation means resin has been drawn into the wood under vacuum, filling the pores so it will not move or absorb water. Visually dramatic and practically more water tolerant than natural walnut.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTake the Classic for restraint, the Verdant for figure.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow Should You Care for It?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eShort, because stainless Damascus is the easy option.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHand wash and dry.\u003c\/strong\u003e Never a dishwasher. Detergent is abrasive, the heat cycle is hard on wooden handles, and blades knocking against racks chip a thin hard edge.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCut on wood or composite boards only.\u003c\/strong\u003e Glass, stone, and ceramic will chip a 60 HRC edge in a single stroke. This is the most common way a good Japanese knife gets ruined.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNothing on the blade.\u003c\/strong\u003e No oiling, no drying panic, no reaction to acidic food. The stainless core and cladding handle all of it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOil the handle occasionally\u003c\/strong\u003e if you have the walnut version, with food grade mineral oil. The stabilised burl needs nothing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNo bone, no frozen food, no hard squash.\u003c\/strong\u003e A thin hard edge chips where a thicker softer one would survive.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHone or sharpen before it gets blunt.\u003c\/strong\u003e A sharp knife is easier to maintain than a dull one, and 1000 grit will keep it there with a few minutes of work every month or two.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWho Is It For?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAnyone buying their first proper Japanese knife, where a gyuto is the right starting shape and stainless is the right starting steel.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGift buyers, and this is the strongest case for the set. A knife alone is a gift that degrades. A knife with the stone to maintain it is a gift that stays as good as the day it arrived, and it teaches a skill worth having.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCooks who want Japanese cutting performance without the carbon steel maintenance routine.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot the right knife\u003c\/strong\u003e for anyone who wants traditional carbon steel and a patina that develops with use. Our \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/6-piece-kurouchi-knife-set-wa-handle\"\u003ekurouchi set\u003c\/a\u003e covers that properly. And not for anyone who cannot keep it off bone and glass boards, since a hard thin edge is unforgiving of both.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy Choose the Gyuto 200?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eA VG-10 equivalent core at 60 HRC doing the cutting, 67 layer stainless cladding protecting it, a tsuchime finish that releases food instead of holding it, a wa handle in a choice of two woods, and the stone to keep it sharp for as long as you own it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without Engraving","offer_id":68020449476771,"sku":"0546","price":200.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with Engraving","offer_id":68020449509539,"sku":"0546-1","price":220.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/Gyuto_Knife_200mm_with_Damascus_Blade_and_Whetstone.webp?v=1795154141","url":"https:\/\/www.stagsteelknives.com\/products\/gyuto-knife-200mm-damascus-whetstone-set","provider":"Stag Steel Knives","version":"1.0","type":"link"}