{"product_id":"flame-coloured-bolster-pocket-knife-bone","title":"Flame Coloured Bolster Knife, Engraved Bone Handle Folder","description":"\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is the Flame Coloured Bolster Folding Knife?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eA folding knife with a bolster carried through purple, violet, and teal, engraved with flowers cut over the colour so the petals sit raised and bright against a darker stippled ground.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNatural bone scales run pale cream alongside it, with a red mosaic pin set at the centre. The contrast is deliberate: one half of the handle does all the work, the other half stays quiet.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe blade is forged Damascus in 156 layers with a drop point and a sabre grind. Overall length runs 7.5 inches open.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Are the Specifications?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBlade material: Hand forged Damascus steel, 1095 and 15N20\u003cbr\u003eDamascus layers: 156\u003cbr\u003eBlade shape: Drop point\u003cbr\u003eGrind: Sabre\u003cbr\u003eBlade thickness: 2 to 3 mm\u003cbr\u003eBlade hardness: 58 to 60 HRC\u003cbr\u003eBlade length: [confirm]\u003cbr\u003eHandle material: Natural camel bone with mosaic pin\u003cbr\u003eBolster: Flame coloured and hand engraved [confirm process and metal]\u003cbr\u003eOverall length: 7.5 inches open\u003cbr\u003eIncludes: Top grain cowhide leather sheath\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGrind, layer count, and steel pairing are covered in full on our \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/wenge-wood-folding-knife-engraved-bolster\"\u003ewenge folder\u003c\/a\u003e, which shares the same construction.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow Is the Bolster Coloured?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eNo paint, no dye, and no coating. The colour is an oxide film grown on the metal itself, and it is the same effect that puts rainbows on a puddle with oil floating on it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA transparent layer forms on the surface, thin enough that light reflecting off its top and light reflecting off the metal underneath travel slightly different distances and interfere with each other. Certain wavelengths cancel, the rest reach the eye, and the result is a colour determined entirely by how thick that film is. Thinner gives straw and bronze. Thicker gives purple, then blue, then teal.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBecause the colour comes from thickness rather than pigment, it cannot fade in sunlight and cannot wash off. What it can do is come off with the layer that carries it, which is the single thing to know about owning one. Covered in care below.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGunsmiths have used the effect on small steel parts for centuries, where fire blued screws and pins were a mark of finish quality. It appears rarely on knives, and almost never under engraving.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is the Engraving?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eFlowers cut through the coloured surface, with petals and leaves polished so they catch light while the ground behind them stays dark and textured.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eCutting through a coloured oxide is different from cutting plain metal, because the colour exists only on the surface. Every line the graver takes removes it, exposing bright metal underneath. The engraver is therefore working in two tones at once, using the colour as a background and the cut as the drawing, with no way to recolour a line that goes wrong.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThat is why the pattern sits open rather than dense. Tight scroll across this bolster would strip most of the colour away and the whole point of the piece with it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/floral-engraved-pocket-knife-full-steel-handle\"\u003efloral full steel folder\u003c\/a\u003e and \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/hand-engraved-brass-handle-folding-knife\"\u003ebrass folder\u003c\/a\u003e carry engraving on uncoloured metal if you want the conventional version.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow Should You Care for a Coloured Bolster?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eOne rule, and it is absolute: \u003cstrong\u003enever polish the bolster.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe colour is a film measured in fractions of a micron. Metal polish is abrasive and will remove it in seconds, and once gone it does not come back with cleaning. What you are left with is a plain grey bolster with engraving on it. The damage is immediate, permanent, and entirely avoidable.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA soft dry cloth is the whole routine. Nothing else touches it. No polish, no abrasive pad, no cleaner, no exception, including when it looks dull from fingerprints. Fingerprints wipe off. Colour does not come back.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eKeep the bolster away from keys and pocket grit for the same reason, which is what the sheath is for.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBone wants the ordinary treatment: out of dishwashers, off radiators, no prolonged soaking, and an occasional wipe of mineral oil to keep the surface fed.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe blade is forged carbon Damascus with little corrosion resistance. Wipe dry after use, keep a thin coat of mineral oil or dedicated blade oil on it, and avoid cooking oils such as olive or vegetable, which oxidise and turn rancid against steel. Grey patina on the blade is normal and protective. Orange rust is not.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne drop of light oil at the pivot. Sharpening follows the \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003eknife sharpening guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWho Is the Knife For?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eCollectors who already own engraved folders in brass, steel, and copper and want one that is none of those colours. Buyers drawn to the knife visually first, which is a legitimate reason and the main one this piece exists.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGift buyers looking for something that does not look like every other knife, where the colour does the work without any explanation needed.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLess suited to hard carry or to anyone who cleans their knives with polish. The colour is the fragile part and it should be treated as the finish on a watch rather than the finish on a tool. Working folders sit in the \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/buy-edc-pocket-knives\"\u003eEDC pocket knives collection\u003c\/a\u003e, and the rest of the engraved range in the \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/buy-pocket-knives\"\u003epocket knives collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy Choose the Flame Coloured Bolster Folding Knife?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eColour grown on metal rather than applied to it, engraving cut through that colour so the pattern reads in two tones, pale bone set against it for contrast, a 156 layer forged Damascus blade at 58 to 60 HRC, and a drop point with a sabre grind.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery knife is forged and finished by hand, and we have been making knives since 2001.\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without Engraving","offer_id":67861735604387,"sku":"0511","price":290.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with Engraving","offer_id":67861735637155,"sku":"0511-1","price":310.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/Flame_Coloured_Bolster_Pocket_Knife_with_Bone_Handle.webp?v=1793785900","url":"https:\/\/www.stagsteelknives.com\/products\/flame-coloured-bolster-pocket-knife-bone","provider":"Stag Steel Knives","version":"1.0","type":"link"}