{"product_id":"damascus-paring-knife-85mm-steel-handle","title":"Damascus Paring Knife 85mm, Integral Steel Handle","description":"\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is the Damascus Paring Knife?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eA small knife made from a single piece of steel, blade and handle together, with no scales and no joints anywhere on it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe blade runs 85 mm with a layered Damascus pattern and a fine point. Behind it the steel widens into a sculpted handle with an open cutout through the middle, shaped to drop weight and give a finger a place to register.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTotal length 190 mm, blade thickness 2 mm.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Are the Specifications?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBlade length: 85 mm\u003cbr\u003eTotal length: 190 mm\u003cbr\u003eBlade thickness: 2 mm\u003cbr\u003eBlade: Layered Damascus\u003cbr\u003eConstruction: Integral, one piece\u003cbr\u003eHandle: Steel with open cutout\u003cbr\u003ePlace of manufacture: Canada\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is a Paring Knife For?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eIn-hand work, which is the distinction most people miss.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery other knife in a kitchen is used on a board, with the food held still and the blade brought down to it. A paring knife is used the other way: the food is in one hand, the knife in the other, and the cut happens in the air with the thumb bracing the work.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThat is why a paring knife is short. Length that helps on a board becomes a liability in the hand, where the blade needs to turn inside an apple or follow the curve of a shallot without the tip wandering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe jobs are specific. Peeling, coring, hulling strawberries, deveining prawns, segmenting citrus, trimming fat, scoring, and removing eyes from potatoes. Also the general small work that a chef knife makes awkward: splitting a garlic clove, opening packaging, cutting a single slice of something.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt 85 mm this is a true paring length. Longer blades sold as paring knives are usually utility knives, which are board tools with a different job.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBoard work sits with our \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/gyuto-knife-200mm-damascus-whetstone-set\"\u003egyuto\u003c\/a\u003e and \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/kiritsuke-knife-210mm-saya-acacia-board\"\u003ekiritsuke\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is an Integral Steel Handle?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBlade and handle shaped from one continuous piece of steel, with nothing attached.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMost knives are made in parts: a blade with a tang, scales either side, pins or adhesive holding them. An integral knife skips all of it. The steel that forms the edge runs through and becomes the grip.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat that buys.\u003c\/strong\u003e No joints means nothing to work loose, nothing to separate, and no seam where water and food residue collect. On a knife used in the hand and washed several times a day, a seamless body is genuinely more hygienic rather than just a claim.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat it costs.\u003c\/strong\u003e Steel is cold and slick. A metal handle will never feel as warm as wood or grip as well as textured composite, particularly with wet or oily hands. The cutout here addresses that directly, giving a finger something to hook and dropping the weight so the knife does not feel dense for its size.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWho it suits.\u003c\/strong\u003e Cooks who prioritise cleanability, and anyone who prefers the look of a single sculpted object over a knife assembled from parts.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuyers who want a warm grip should look at the wooden wa handles on our \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/6-piece-kurouchi-knife-set-wa-handle\"\u003ekurouchi set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eIs Damascus Steel Made Like a Katana?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eNo, and the comparison gets made so often it is worth answering properly.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow a katana is made.\u003c\/strong\u003e Iron sand is smelted in a clay tatara furnace into tamahagane, a bloom of steel with inconsistent carbon content. The smith sorts it, forges it, and folds it repeatedly, not to make a pattern but to even out the carbon and drive out slag. The blade is then coated in clay, thick along the spine and thin at the edge, and quenched in water. The edge cools fast and hardens, the spine cools slowly and stays tough, and the boundary between them is the hamon. The grain pattern visible on a finished katana is the hada, a byproduct of folding rather than its purpose.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow laminated Damascus is made.\u003c\/strong\u003e Two stainless alloys with different responses to etching are forge welded in alternating layers, usually as cladding around a separate hard core. The blade is ground and etched in acid, and the alloys etch at different rates, revealing the layers. The pattern is the objective, not a side effect.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDifferent steel, different furnace, different reason for folding, different hardening, different outcome. A laminated stainless kitchen knife is not made like a katana and does not need to be. It is made to cut food, hold an edge, and not rust, and modern metallurgy does all three better than tamahagane ever did.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAnyone telling you otherwise is selling you a story. The steel is what matters, which is why the core alloy and the hardness are the two numbers worth asking for on any Damascus knife.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOur \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/what-is-the-best-steel-for-knives\"\u003esteel comparison\u003c\/a\u003e covers what the different constructions actually do.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow Should You Care for It?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHand wash and dry.\u003c\/strong\u003e Never a dishwasher. Detergent is abrasive on an etched surface and can dull the Damascus pattern over time, and the heat cycle does nothing good for a fine edge.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNothing to oil.\u003c\/strong\u003e No wood, no scales, no joints. The whole knife is steel, and if the core confirms as stainless there is no oiling routine at all.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMind the grip when wet.\u003c\/strong\u003e A steel handle is slick with wet or oily hands. Dry your hands before detail work with it, which you should be doing anyway with a sharp blade used in the hand.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eStore it protected.\u003c\/strong\u003e An 85 mm blade loose in a drawer gets chipped by everything around it. A sheath, a guard, or an in-drawer insert.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCut on wood or composite\u003c\/strong\u003e when you do use it on a board.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSharpening follows our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003eknife sharpening guide\u003c\/a\u003e. A short blade is the easiest thing to sharpen on a stone, since the whole edge can be worked in one or two passes.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWho Is It For?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eCooks who do a lot of in-hand work and have been making do with a chef knife or a cheap paring knife, which is most people. A good paring knife is the second knife worth upgrading after the chef knife, and almost nobody does it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAnyone who values a seamless, joint-free knife for cleanliness, which matters most on the knife that gets handled the most.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGift buyers looking for something small and considered rather than a full set, and it pairs naturally with any of our larger knives.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot the right knife\u003c\/strong\u003e for board work, where the short blade and the steel handle both work against you. Our \u003ca href=\"https:\/\/www.stagsteelknives.com\/products\/gyuto-knife-200mm-damascus-whetstone-set\"\u003egyuto\u003c\/a\u003e covers general prep, and the \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/kitchen-knives-set\"\u003ekitchen knife sets collection\u003c\/a\u003e covers full ranges.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy Choose the Damascus Paring Knife?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eOne piece of steel with nothing to loosen or harbour anything, a true 85 mm paring length rather than a shrunken utility knife, a 2 mm blade fine enough for detail work, and a cutout that drops the weight and gives the hand a point of reference.\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without Engraving","offer_id":68020533887139,"sku":"0548","price":150.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with Engraving","offer_id":68020533919907,"sku":"0548-1","price":180.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/Damascus_Paring_Knife_85mm_with_Integral_Steel_Handle.webp?v=1795155436","url":"https:\/\/www.stagsteelknives.com\/products\/damascus-paring-knife-85mm-steel-handle","provider":"Stag Steel Knives","version":"1.0","type":"link"}