{"product_id":"damascus-folding-hawkbill-knife-pine-cone-handle-edc-folder","title":"Damascus Folding Hawkbill Knife | Pine Cone Handle, EDC Folder","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eA handmade folding hawkbill pocket knife with a 3 inch hand-forged Damascus blade, a cut-through maker's mark, polished bolsters over brass liners, teal pine cone resin scales, and a thumb stud for two-handed opening.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhy Folding Hawkbills Are Rare\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eMost hawkbills are fixed blades, and the reason is geometric rather than stylistic. A curved blade has to fold back into a handle that follows the same arc, or the tip protrudes past the scales when closed. Getting the curve, the pivot position, and the handle shape to agree takes more fitting work than a straight blade folder, where the blade drops into a straight channel and the job is done.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe Juniper solves it by curving the handle to mirror the blade, so the closed knife reads as one continuous shape and the tip seats fully inside the scales. Compare the profile against the fixed blades in our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/collections\/handmade-hawkbill-knives\"\u003ehandmade hawkbill knives\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhat Is a Hawkbill Blade For?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eA hawkbill drops the tip below the handle line and puts the edge on the inside of the curve, so it cuts on the pull rather than the push. Hooking a rope, a strap, a length of cord, or a wrap of twine and drawing the blade back through it means the material is pulled into the edge instead of pushed away from it, which is why a hawkbill goes through cordage faster than a straight blade of the same length.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe shape earns its keep anywhere the work is repetitive. Riggers, warehouse crews, gardeners, and anyone opening a lot of packaging find the motion faster once it is learned. Straight blades stay better for slicing on a board, whittling, and food. Nothing about a hawkbill is general-purpose, and that is the trade. For blades that are, our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/collections\/buy-edc-pocket-knives\"\u003eEDC pocket knives\u003c\/a\u003e range is the place to look.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhat Damascus Is the Blade?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eHand-forged 15N20 and 1095, hardened to 58 to 60 HRC, etched into a flowing wave that follows the curve of the blade rather than running straight down it. Curved stock shows a pattern differently from flat stock, since grinding through a curve cuts the layers at a changing angle and the bands widen and tighten along the belly as a result.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe maker's mark is cut clean through the blade rather than etched onto the surface, so it reads from both sides and cannot wear off. Cutting through a Damascus blade also exposes the layer edges around the opening, which is a detail worth looking at closely. For the background on how the layering forms, read our guide on \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/how-is-damascus-steel-made\"\u003ehow Damascus steel is made\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv dir=\"ltr\" class=\"overflow-x-auto w-full px-2 mb-6 print:overflow-x-visible\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-[hsl(var(--border-300)\/0.6)] py-2 pr-4 align-top font-bold\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-[hsl(var(--border-300)\/0.6)] py-2 pr-4 align-top font-bold\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eProduct type\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eHandmade folding hawkbill pocket knife\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBlade length\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003e3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eClosed length\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003e4.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eOpen length\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003e7.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBlade material\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eHand-forged 15N20\/1095 Damascus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBlade hardness\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003e58–60 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBlade style\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eHawkbill, concave inner edge, cuts on the pull\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBlade detail\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eCut-through maker's mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eOpening\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eThumb stud, two-handed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eLock type\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003e\u003cstrong\u003e[confirm before publishing]\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBolsters\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003ePolished steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eLiners\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eHandle material\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eTeal pine cone resin, cast and stabilized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eFittings\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eNickel-silver pins, lanyard hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eEngraving\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-[hsl(var(--border-300)\/0.3)] py-2 pr-4 align-top\"\u003eOptional blade personalization, $20 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eHow Do the Bolsters and Brass Liners Change the Knife?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eLiners are the structural spine of any folder. The pivot, the stop pin, and the lock all anchor into them, and the scales are essentially cosmetic panels bonded to the outside. Brass liners weigh more than steel or titanium of the same thickness, which is why the Juniper sits heavier in a pocket than a modern production folder of the same size.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe weight is a deliberate choice rather than an oversight. A heavier folder sits more solidly in the hand and closes with more authority, and brass takes a patina rather than corroding, so the liners age instead of pitting. The polished bolsters cap the pivot end, protect the leading edge of the scales where the knife takes most of its knocks, and give the whole thing the traditional pocket knife proportion. Similar fittings run through our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/collections\/damascus-folding-knives\"\u003eDamascus folding knives\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhat Are the Teal Pine Cone Scales?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003ePine cones sectioned and cast into teal-pigmented resin, then cut into scales and stabilized. What makes the teal colourway different from the blue and green versions in our fixed blade line is where the cut falls: these scales are taken through the length of the cone rather than across it, so the bronze lattice runs in long fanning strokes down the handle instead of appearing as rounded cross-sections.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eOn a folder the material choice does more work than it does on a fixed blade. Scales here are thin panels bonded to brass liners rather than thick slabs pinned through a tang, and resin holds an edge on a thin section without chipping in a way that natural wood or bone will not. Resin is also completely stable against moisture, which matters on a knife with a pivot that lives in a pocket.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eEvery block pours differently and every cut falls somewhere different through the cone, so the scale pattern is unique to the one knife. Keep it clear of acetone and abrasive cleaners, and off a truck dashboard in summer.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eIs a Folding Hawkbill Legal to Carry in Canada?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe blade folds, needs two hands to open, and cannot be flicked into position, which keeps it outside the centrifugal opening prohibition that catches automatic and flick-open knives in Canada.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eBeyond that, Canadian law weighs purpose rather than blade shape. Carrying any knife for protection is not lawful here regardless of what it looks like. Provinces and municipalities layer their own rules on top, and some public spaces have blanket restrictions. Our guide to \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/pocket-knife-laws-in-canada\"\u003eCanadian pocket knife laws\u003c\/a\u003e sets out the framework with links to the government sources. Nothing on this page is legal advice, and rules change.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhich Tasks Suit This Knife?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003ePull cuts on cordage, and a great deal of them. Rope, twine, strapping, packaging tape, shrink wrap, hose, zip ties, and garden work like taking back small green growth, which is the same job pruning knives use the shape for.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eUnderstand what it will not do. A hawkbill cannot pierce, because the tip curves away from whatever you point it at. It cannot slice on a board, because there is no straight section to meet a flat surface. Food prep, whittling, and skinning all want a different blade. Buying a hawkbill as an only knife leads to frustration inside a week.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eHonest Note on Who Should Buy This One\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eTwo questions decide it. Do you cut a lot of cord, and do you want a folder rather than a fixed blade?\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eIf the answer to the first is no, the shape will disappoint you no matter how good the Damascus looks, and a drop point folder from our pocket knife range will serve you every day instead of sitting in a drawer. If the answer to the second is no, the fixed blade Lone Star Talon at $135 gives you the same geometry with no pivot to maintain and a faster draw, at the cost of needing a sheath on your belt.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eTake the Juniper if you want the hawkbill motion in something that lives in a pocket, or if you collect folders and want a genuinely difficult pattern executed properly rather than a straight blade with a curve ground into it.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eHow Should You Care for a Damascus Folder?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eFolders need everything a fixed blade needs plus attention to the pivot, which is where grit collects and where a neglected knife starts to feel gritty and stiff.\u003c\/p\u003e\n\u003col dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-decimal flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eWipe the blade down after every use, especially after salt, sap, or anything acidic.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFlush the pivot with warm water if it collects dust or lint, then dry it thoroughly.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDry the blade, bolsters, and scales fully. Never leave a folder closed while wet.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePut a single drop of light oil on the pivot every few months, and a thin coat of mineral oil on the blade before storage.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eStore open or loosely closed in a dry place rather than sealed in a pocket or a damp bag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eDamascus is high carbon rather than stainless, so a grey patina across the flats is normal and mildly protective, while orange spotting comes off with oil and a non-scratch pad. Sharpening a hawkbill takes a round ceramic or tapered diamond rod rather than a flat stone, since a flat surface cannot reach inside a concave curve, and our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003eknife sharpening guide\u003c\/a\u003e covers the angle to hold.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eCan You Personalize It?\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eYes. Custom engraving is $20 CAD, added at checkout, with your text entered in the engraving instructions field. Space on a 3 inch curved blade with a cut-through mark already in it is tight, so initials or a date suit it better than a name and message. For a different resin colour or scale material, get in touch through our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/pages\/contact-us\"\u003ecustom knife request form\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" class=\"mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eMade by Hand in Canada\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eStag Steel Knives has been forging since 2001, and every blade is drawn out, ground, heat-treated, and finished by hand in our New Brunswick shop, with the liners cut, the scales fitted, and the knife assembled and tuned individually. Free shipping across Canada and the United States. Compare the Juniper against the rest of the range in our \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/collections\/buy-pocket-knives\"\u003epocket knives\u003c\/a\u003e and \u003ca class=\"underline underline underline-offset-2 decoration-1 decoration-current\/40 hover:decoration-current focus:decoration-current\" href=\"https:\/\/www.stagsteelknives.com\/collections\/survival-knives\"\u003esurvival knives\u003c\/a\u003e collections.\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without Engraving","offer_id":47252658847932,"sku":"BC-442","price":160.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with Engraving","offer_id":47252658880700,"sku":"BC-442-1","price":160.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/damascus-folding-hawkbill-pine-cone-handle.webp?v=1786210707","url":"https:\/\/www.stagsteelknives.com\/products\/damascus-folding-hawkbill-knife-pine-cone-handle-edc-folder","provider":"Stag Steel Knives","version":"1.0","type":"link"}