{"product_id":"bbq-knife-set-3-piece-twist-damascus-walnut","title":"BBQ Knife Set in Twist Damascus, 3 Piece Walnut Handle","description":"\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is in the Three Piece Set?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThree hand forged knives in twist pattern Damascus with walnut handles, chosen to cover a kitchen rather than fill a block.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA 10 inch slicer for brisket, roasts, and anything cut in long strokes. An 8 inch chef knife for the daily work of chopping, dicing, and breaking down produce. A 5 inch petty for the jobs too small for a chef knife and too large for a paring knife.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll three carry the same twist pattern and the same walnut, forged and fitted to match.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Are the Specifications?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBlade material: Hand forged Damascus steel, 1095 and 15N20\u003cbr\u003ePattern: Twist Damascus, etched\u003cbr\u003eBlade hardness: 58 to 60 HRC\u003cbr\u003eHandle material: Walnut\u003cbr\u003eSlicer blade length: 10 inches\u003cbr\u003eChef blade length: 8 inches\u003cbr\u003ePetty blade length: 5 inches\u003cbr\u003eEdge grind: [confirm, single or double bevel]\u003cbr\u003eSet size: 3 pieces\u003cbr\u003eStorage: Dry storage required, high carbon steel\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy These Three Knives?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eMost kitchen sets are sized to look substantial on a shelf. Three knives is what a kitchen actually uses.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eResearch into home kitchen habits repeatedly lands on the same finding: a chef knife and a paring knife do the overwhelming majority of all cutting, and most additional knives in a block stay there. Buying seven knives usually means buying two knives and five ornaments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhat this set adds to the working pair is the one knife that genuinely cannot be substituted. Long slicing cannot be done well with an 8 inch chef knife, because the blade runs out before the cut does and the stroke has to be repeated, which tears the face of the meat. Anyone who cooks a roast or a brisket hits that limitation immediately.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 5 inch petty replaces the paring knife and extends it. Petty is the Japanese term for a small utility blade, long enough to work on a board rather than in the hand, which suits shallots, garlic, herbs, and trimming.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLarger sets sit in the \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/kitchen-knives\"\u003ekitchen knives collection\u003c\/a\u003e for anyone who wants the full range.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhat Is Twist Damascus?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eA pattern made by twisting the steel rather than layering it flat.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDamascus starts as alternating layers of two steels forge welded into a billet. Left alone, grinding that billet flat exposes the layers as straight lines. Twist Damascus takes the welded bar, draws it square, heats it, and rotates it along its own axis so the layers wind into a helix. Flattening and grinding the result cuts across those spirals, and what surfaces is a field of swirls and rosettes rather than stripes.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe work is visible in the result. Each twist means another heat cycle and another chance to lose the billet, so twist patterns carry more forging time than a straight ladder does.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNothing about pattern affects cutting. The 1095 and 15N20 pairing is chosen because nickel in the 15N20 resists the acid etch and leaves bright lines against dark carbon steel, which is what makes any of it visible. Our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/what-is-the-best-steel-for-knives\"\u003esteel comparison\u003c\/a\u003e sets Damascus against carbon and stainless.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy a 10 Inch Slicer for BBQ?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eBecause brisket is wide and a cut should be one stroke.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA slicer is long, thin, and almost straight, with minimal belly and a narrow profile that reduces drag through meat. The length matters because the goal is to draw the blade through in a single pull rather than sawing back and forth. One stroke leaves a clean face and keeps the juice in the meat. Sawing shreds the surface and squeezes it out.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTen inches is around the minimum that clears a brisket flat comfortably, which is why pitmasters consistently recommend 10 to 12 inches for the job. Anything shorter means repeated strokes on the widest cut on the smoker.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe same blade handles prime rib, turkey breast, ham, pork loin, and salmon sides. Anyone who cooks whole cuts uses it more than they expect to.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor carving around bone, where a point is needed to work into joints, a dedicated carving knife is the better tool. The slicer here is built for clean cuts through clear meat.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy Walnut?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eWarm mid brown with a visible open grain, and an honest set of trade offs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWalnut has been the standard for tool and gun handles for centuries because it is dimensionally stable, meaning it resists warping and twisting as humidity changes. It is also moderately dense rather than heavy, which keeps a kitchen knife balanced toward the blade where it should be, and it is comfortable against the hand in a way dense tropical hardwoods are not.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe trade off is porosity. Walnut has an open grain, so it needs oiling to stay sealed, where resin stabilised handles need nothing. Care section below covers it, and it takes a minute a month.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne thing in its favour that will not be obvious: walnut carries no international trade restriction. Many tropical hardwoods sold as knife handles, rosewood among them, fall under CITES controls that complicate international shipping. Walnut does not.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eHow Should You Care for Carbon Damascus in a Kitchen?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe most important section on this page, because a kitchen is harder on carbon steel than any other environment these knives could be used in.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eForged Damascus made from 1095 and 15N20 contains no chromium, which means no corrosion resistance at all. In a kitchen that has specific consequences.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWash and dry immediately after each use. Not at the end of cooking, immediately after the knife is finished with. A blade left wet in a sink for twenty minutes will show spots.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAcidic foods react fast. Tomato, lemon, onion, and vinegar will darken the blade within minutes of contact. That reaction is patina rather than rust, and it is harmless, but anyone who wants a bright blade should wipe between cuts.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever put these in a dishwasher. Heat, detergent, and a long wet cycle will rust the blades and split the walnut.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eStore dry, and oil the blades with food grade mineral oil before any period of storage. Avoid cooking oils such as olive or vegetable oil, which oxidise and go rancid.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOil the walnut every month or two with food grade mineral oil or a board conditioner. A wipe on, wait, wipe off takes a minute and keeps the wood sealed against the water it meets daily.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA soft grey patina developing over the first months is normal and protective, and many cooks prefer the look of it. Orange rust is not normal, and comes off with oil and a non abrasive pad before it pits. Our \u003ca href=\"https:\/\/www.stagsteelknives.com\/blogs\/blog-posts\/best-way-to-sharpen-a-knife\"\u003esharpening guide\u003c\/a\u003e covers edge maintenance, and 1095 sharpens more easily than most modern alloys.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWho Is the Set For?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAnyone who smokes, grills, or roasts whole cuts, where the 10 inch slicer earns the set on its own. Home cooks who want three knives that work rather than seven that sit. Gift buyers for Father’s Day, Mother’s Day, housewarmings, and weddings, where a three piece set lands at a sensible price without looking slight.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNot suited to anyone who wants low maintenance knives. Carbon Damascus and walnut both need attention, and buyers who will leave knives in the sink should choose stainless. Buyers who want larger sets or different handle materials should see the \u003ca href=\"https:\/\/www.stagsteelknives.com\/collections\/kitchen-knives\"\u003ekitchen knives collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" aria-level=\"5\"\u003eWhy Choose the Three Piece BBQ Knife Set?\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eA 10 inch slicer most sets leave out, an 8 inch chef and 5 inch petty that cover the rest of a kitchen, twist pattern Damascus at 58 to 60 HRC, and walnut handles fitted to match.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery knife is forged and finished by hand, and we have been making knives since 2001.\u003c\/p\u003e","brand":"Stag Steel Knives","offers":[{"title":"Knife without engraving","offer_id":67846297387171,"sku":"0496","price":350.0,"currency_code":"CAD","in_stock":true},{"title":"Knife with engraving","offer_id":67846297419939,"sku":"0496-1","price":400.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/4621\/4332\/files\/BBQ_Knife_Set_3_Piece_Twist_Damascus_with_Walnut_Handles.webp?v=1793605232","url":"https:\/\/www.stagsteelknives.com\/products\/bbq-knife-set-3-piece-twist-damascus-walnut","provider":"Stag Steel Knives","version":"1.0","type":"link"}